Configuration Description

The command sequence below enables SmartNode to support static service via DynDNS (i.e. http://www.dyndns.org). If your IP address changes less often than every 28 days, you should use this Service-Static configuration. If your IP address changes more often, you should use ths Service Dynamic configuration. (shown above, on this web page). When in doubt, use static configuration.

NOTE: You must replace the following variables with your site-specific values:

MyAccount.dyndns.org
MyAccount
MyPassword

Command Sequence to copy, edit and paste

context ip
dyndns
  hostname MyAccount.dyndns.org wildcard
  authentication MyAccount MyPassword
  service static
  observe eth0