1) Console or Telnet into the unit and login.
2) Click on "enable" and enter Supervisor password with is "root" by
default.
3) Go to "setup".
4) Go to "bridge"
5) Enter the Gateway address here
6) Go back to the main screen and go to "write"
7...
FIRMWARE UPGRADE ETHERNET EXTENDER (CL1314 SERIES)
FACTORY DEFAULT SETTINGS:
1. Default IP Addresses:
a. CL1314MDE/EUI: 192.168.200.1/24
b. CL1314R/L/EUI, CL1314/L/EUI (local unit): 192.168.200.1/24
c. CL1314R/R/EUI, CL1314/R/EUI (remote unit): 192.168....
We did a test with a laptop on each end connected to a pair of CL2300
units with minimal twisted pair connection between the two CL2300. The
test was a ping from the 'local' laptop to the 'remote' laptop. The
round-trip time was 8 - 10 ms. The default pin...
Trinity OS makes the TDR functionality provided by the SHDSL chipset
used in many Patton Electronics devices available for use. TDR can be
used for SELT tests to determine cable properties such as length,
type, opens, shorts, and bridge taps. See the Trin...