Procedure:
1. Reboot router while holding the spacebar; make sure you are connected using the console port. (this will start unit in Boot OS) 2. Once you see the “]” prompt and see the cursor moving across the screen you can stop holding down the spacebar. 3. At the “]” prompt, type: configflash flashfs emergency 4. At the “]” prompt, type: reset (wait for the unit to reboot) 5. At the IP address> prompt, type: sysconfig defaults 6. Reboot router while holding the spacebar. (this will start unit in Boot OS) 7. Once you see the “]” prompt and see the cursor moving across the screen you can stop holding down the spacebar. 8. At the “]” prompt, type: configflash flashfs auto 9. At the “]” prompt, type: reset 10. Wait for the unit to reboot
|