FIRMWARE UPGRADE ETHERNET EXTENDER (CL1314 SERIES)
FACTORY DEFAULT SETTINGS:
1. Default IP Addresses:
a. CL1314MDE/EUI: 192.168.200.1/24
b. CL1314R/L/EUI, CL1314/L/EUI (local unit): 192.168.200.1/24
c. CL1314R/R/EUI, CL1314/R/EUI (remote unit): 192.168....
We did a test with a laptop on each end connected to a pair of CL2300
units with minimal twisted pair connection between the two CL2300. The
test was a ping from the 'local' laptop to the 'remote' laptop. The
round-trip time was 8 - 10 ms. The default pin...
The following post on the Patton blog introduces and summarizes the
policy routing feature of Trinity.
https://blog.patton.com/index.php/2017/08/02/policy-routing-on-smartnodes/
* Standard Ethernet v2 MTU is 1500 bytes; this is the largest
payload size of the Ethernet frame and would be the maximum size of
e.g. an IP datagram within the Ethernet frame.
* Ethernet v2 FRAME SIZE with 1500 byte payload is 1518 bytes
(without VL...
