Configuration description

It is possible to store call logs with quality information in the local aaa data sink. To do so, a service aaa is needed where the calls are routed through. Create a profile aaa with the method local. Then create a service aaa to route the calls through.
To see the collected logs use the command show accounting or use the Web-GUI to see the logs. In the Web-GUI, go to the 'Reports' page and select “Call Quality Log” in the tab bar on top of the page. On that page, you will also have the option to export the log as a comma separated text file.
The maximum amount of records to be stored on the SmartNode is 50 entries.

The output looks like this:
 

172.16.71.10(port)[bri]#show accounting
AAA Log
=======
Call
---------
General
Start time: 70-02-11 00:01:01
Duration: 21
State: T:16 (originator)
Calling party
Number :
Name :
IP Address : 0.0.0.0
CODEC :
MOS : 450
Octets Rx/Tx : 0/0
Packets Rx/Tx : 0/0
Lost Packets Rx/Tx : 0/0
Jitter Rx/Tx : 0/0
RTT : 0
Called party
Number :
Name :
IP Address : 172.16.90.3
CODEC : G.711 A-law
MOS : 440
Octets Rx/Tx : 0/145280
Packets Rx/Tx : 0/908
Lost Packets Rx/Tx : 0/0
Jitter Rx/Tx : 0/0
RTT : 0

Command sequence to copy, edit and paste in the following link.

example configuration aaa