|
Configuration Description
This configuration shows an example for how to route calls beetwen an ISDN and SIP network including registration on a SIP server using the new SIP gateway configuration architecture within the SWR5.T software version.
Commande Sequence to copy, edit and paste
#----------------------------------------------------------------#
#
# SN411X / SN452X / SN453X / SN455X / SN463X / SN483X / SN4960 /
# R5.X and R6.X SIP / H323
#
# NEW SIP GATEWAY CONFIGURATION INCLUDING CONTEXT CS
#
# After replacing all variables you may copy and paste this
# configuration part into your offline configuration file.
#
# This configuration shows an example for how to route calls
# beetwen an ISDN and SIP network including registration on a SIP
# server using the new SIP gateway configuration architecture
# within the SWR5.T software version.
#
# DATE: 2007-10-31
# AUTHOR: Gion Padrun;
# PATTON-INALP-NETWORKS; CH-3172 NIEDERWANGEN
# WWW.PATTON.COM WWW.INALP.COM
#
#
#----------------------------------------------------------------#
context cs switch
routing-table called-e164 RT_TO_SIP
route .T dest-interface IF_SIP
interface isdn IF_ISDN
route call dest-table RT_TO_SIP
interface sip IF_SIP
route call dest-interface IF_ISDN
remote <remote domain-name or ip-address>
local <remote domain-name or ip-address>
bind context sip-gateway GW_SIP
context cs switch
no shutdown
authentication-service SER_AUTH_OB
username <authentication username> password <authentication password>
location-service SER_LOC_CERT
domain 1 <sip domain>
identity <your sip identity>
authentication outbound
authenticate 1 authentication-service SER_AUTH_OB username <authentication username>
registration outbound
registrar <URL or IP-address of registrar server>
lifetime 300
register auto
context sip-gateway GW_SIP
interface IF_GW_WAN
bind interface <bind interface name> context router
context sip-gateway GW_SIP
bind location-service SER_LOC_CERT
no shutdown
| 
(8748 vote(s))
Helpful
Not helpful