SN46X8 SmartWare SWR 6.X Sample configuration SmartNode connected as trunk gateway between a SIP network and PBX with 4 S0 port.
Copy and paste the below config in to a text editor. Replace all the values as described on the lines starting with a #
The Port S0 slot 0 port 0 is configured as fall-back and sync-port. It is configured in the user mode and should be connected to a PSTN. The ports slot 0 port 1 to 4 are configured as net and should be connected to a PBX. Not all the ports have to be connected
#-----------------------------------------------------------------# # # # SN46XX # # SMARTWARE 6.X # # # # Sample configuration of context CS and ISDN ports only. # # Without gateway and IP configuration. # # # # SmartNode connected as trunk gateway between a SIP network # # and ISDN PBX with 4 S0 port. The Port S0 slot 0 port 0 (BRI 0/0)# # is configured as fallback and sync-port. It is configured in # # user mode and should be connected to a PSTN. # # The ports slot 0 port 1 to 4 are configured as net and should # # be connected to a PBX. Not all the ports have to be connected # # # # DATE: 2013-06 # # AUTHOR: Thomas Tlapak / Marc Aeberhard # # PATTON-INALP-NETWORKS; CH-3172 NIEDERWANGEN # # WWW.PATTON.COM WWW.INALP.COM # # # # # #-----------------------------------------------------------------#
system clock-source 1 bri 0 0
profile dhcp-server DHCPS_LAN network 192.168.1.0 255.255.255.0 include 1 192.168.1.10 192.168.1.99 lease 1 minutes default-router 1 192.168.1.1 domain-name-server 1 192.168.1.1
context ip router
interface WAN # Enter below the IP address and SubnetMask of the SmartNode ipaddress 172.16.10.10 255.255.255.0 use profile napt NAPT_WAN
interface LAN ipaddress 192.168.1.1 255.255.255.0 tcp adjust-mss rx mtu tcp adjust-mss tx mtu
context ip router dhcp-server use profile DHCPS_LAN # Enter below the default Gateway IP address, replacing the 172.16.10.1 route 0.0.0.0 0.0.0.0 172.16.10.1 0
context cs switch
routing-table called-e164 RT_CDPN_OUT route .T dest-service SERV_HG_2_OUT
interface sip IF_SIP bind context sip-gateway GW_SIP # Enter below the SIP server / Softswitch IP address or FQDN remote <0.0.0.0> trust remote # Enter below the SIP account username, to be used for authentication address-translation outgoing-call from-header user-part fix <account number> route call dest-service SERV_HG_2_PBX
interface isdn IF_ISDN_00 route call dest-service SERV_HG_2_PBX
interface isdn IF_ISDN_01 route call dest-table RT_CDPN_OUT
interface isdn IF_ISDN_02 route call dest-table RT_CDPN_OUT
interface isdn IF_ISDN_03 route call dest-table RT_CDPN_OUT
interface isdn IF_ISDN_04 route call dest-table RT_CDPN_OUT service hunt-group SERV_HG_2_OUT drop-cause normal-unspecified drop-cause no-circuit-channel-available drop-cause network-out-of-order drop-cause temporary-failure drop-cause switching-equipment-congestion drop-cause access-info-discarded drop-cause circuit-channel-not-available drop-cause resources-unavailable route call 1 dest-interface IF_SIP route call 2 dest-interface IF_ISDN_00
service hunt-group SERV_HG_2_PBX drop-cause normal-unspecified drop-cause no-circuit-channel-available drop-cause network-out-of-order drop-cause temporary-failure drop-cause switching-equipment-congestion drop-cause access-info-discarded drop-cause circuit-channel-not-available drop-cause resources-unavailable route call 1 dest-interface IF_ISDN_01 route call 2 dest-interface IF_ISDN_02 route call 2 dest-interface IF_ISDN_03 route call 2 dest-interface IF_ISDN_04 context cs switch no shutdown
authentication-service SER_AUTH_OB # Enter below the username and password of the SIP TRUNK Account. username <authentication username> password <authentication password>
location-service SER_LOC_CERT # Enter the SIP Trunk accound or IP address domain 1 <sip domain>
#Enter the SIP TRUNK identity again identity <your sip identity>
authentication outbound authenticate 1 authentication-service SER_AUTH_OB
registration outbound # Again set the SIP TRUNNK Domain or IP address registrar <URL or IP-address of registrar server> lifetime 300 register auto
context sip-gateway GW_SIP
interface IF_GW_WAN bind interface WAN context router
context sip-gateway GW_SIP bind location-service SER_LOC_CERT no shutdown
port ethernet 0 0 medium auto encapsulation ip bind interface WAN router no shutdown
port ethernet 0 1 medium auto encapsulation ip bind interface LAN router no shutdown
port bri 0 0 clock auto encapsulation q921
q921 protocol pp uni-side auto encapsulation q931
q931 protocol dss1 uni-side user encapsulation cc-isdn bind interface IF_ISDN_00
port bri 0 0 no shutdown
port bri 0 1 clock auto encapsulation q921
q921 protocol pp uni-side auto encapsulation q931
q931 protocol dss1 uni-side net encapsulation cc-isdn bind interface IF_ISDN_01
port bri 0 1 no shutdown
port bri 0 2 clock auto encapsulation q921
q921 protocol pp uni-side auto encapsulation q931
q931 protocol dss1 uni-side net encapsulation cc-isdn bind interface IF_ISDN_02
port bri 0 2 no shutdown
port bri 0 3 clock auto encapsulation q921
q921 protocol pp uni-side auto encapsulation q931
q931 protocol dss1 uni-side net encapsulation cc-isdn bind interface IF_ISDN_03
port bri 0 3 no shutdown
port bri 0 4 clock auto encapsulation q921
q921 protocol pp uni-side auto encapsulation q931
q931 protocol dss1 uni-side net encapsulation cc-isdn bind interface IF_ISDN_04
port bri 0 4 no shutdown
|