#----------------------------------------------------------------#
# Patton SmartNode in combination with Voxbone                   #
#                                                                #
# This config is used when connecting the SmartNode to           #
# Voxbone VoIP service to receive incoming calls only.           #
#                                                                #
# Author: Danny Staub                                            #
# Patton Electronics Co.                                         #
# Gaithersburg, MD 20879                                         #
# www.patton.com; support@patton.com                             #
#                                                                #
# Date: 03/12/2013                                               #
#                                                                #
#----------------------------------------------------------------#

cli version 3.20
dns-client server 8.8.8.8
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4

system

  ic voice 0

system

profile acl ACL_IN
  # Enter the IP address or your local Voxbone server
  permit 1 ip host xxx.xxx.xxx.xxx any
  # IP address or range permitted for remote management
  permit 2 ip <src-base-address> <src-wildcard> any
  deny 3 ip any any
  deny 4 icmp any any

profile napt NAPT_WAN

profile ppp default

profile tone-set default

profile voip default
  codec 1 g711alaw64k rx-length 20 tx-length 20
  codec 2 g711ulaw64k rx-length 20 tx-length 20

profile pstn default

profile sip default
  no autonomous-transitioning

profile dhcp-server DHCPS_LAN
  network 192.168.1.0 255.255.255.0
  include 1 192.168.1.10 192.168.1.99
  lease 2 hours
  default-router 1 192.168.1.1
  domain-name-server 1 192.168.1.1

profile aaa default
  method 1 local
  method 2 none

context ip router

  interface WAN
    ipaddress dhcp
	use profile acl ACL_IN in
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

  interface LAN
    ipaddress 192.168.1.1 255.255.255.0
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

context ip router
  dhcp-server use profile DHCPS_LAN

context cs switch

  interface sip IF_SIP_VOXBONE
    bind context sip-gateway GW_SIP_VOXBONE_VOXBONE
    route call dest-interface IF_ISDN_00
    # Enter the IP address or your local Voxbone server
	remote xxx.xxx.xxx.xxx
    trust remote

  interface isdn IF_ISDN_00
	
context cs switch
  no shutdown

context sip-gateway GW_SIP_VOXBONE

  interface IF_GW_SIP_VOXBONE
    bind interface WAN context router port 5060

context sip-gateway GW_SIP_VOXBONE
  no shutdown

port ethernet 0 0
  medium auto
  encapsulation ip
  bind interface WAN router
  no shutdown

port ethernet 0 1
  medium auto
  encapsulation ip
  bind interface LAN router
  no shutdown

port e1t1 0 0
  port-type <e1/t1>
  clock auto
  framing <esf/crc4/non-crc4/sf/unframed>
  encapsulation q921

  q921
    uni-side auto
    encapsulation q931

    q931
      protocol <ni2/dss1/ntt/pss1/dms-100>
      uni-side <net/user>
      bchan-number-order ascending
      encapsulation cc-isdn
      bind interface IF_ISDN_00 switch

port e1t1 0 0
  no shutdown